Uxcell M-28 Drive V-Belt Industrial Power Rubber Transmission Belt 28 Inch Pitch Girth 10Mm Width 5.5Mm Height JIS Standard 2Pcs
Description
| Item model number | a19111300ux0336 |
| Belt Style | V Belt |
| Product Dimensions | 28"L x 0.39"W |
| Country of Origin | China |
| Compatible Devices | Printer |
| Manufacturer | uxcell |
| Brand | uxcell |
| Size | 28" |
- Size: Model: M-28; Pitch Girth: 28 inch; Inner Girth: 682mm/27 inch; Top Width: 10mm; Thickness: 5.5mm; Angle: 40 degree. Produced according to the Japanese standard JIS K 6323.
- Material: It is made of neoprene rubber for resistance to oils, water, and some solvents.
- Function: To link two or more rotating shafts to transmit power in a drive system. Even load distribution on belt drives and good wear resistance.
- Feature: The trapezoidal shape of the belts cross section wedges into the groove of a similarly shaped sheave or pulley to provide traction and alignment.
- Applications: Used for drive systems in the automotive, agricultural, textile, printing, mining, and office equipment industries, ect.
Product Description
How to measure the length of the required belt:
- Wrap the rope around the two pulleys
- Make a mark
- Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt
- To accurately measure the length of the v-belt, use a belt measuring tool or a soft ruler, not a steel ruler.
- The width and thickness of the belt should also be measured to confirm the type of belt.
Installation:
- First, loosen the tensioning device, then press the v-belt into the pulley groove by hand, and finally tighten it again.
Notice:
- Pay attention to the wear of the belt groove of the v-belt pulley.
- Check whether the centerline of the two pulley shafts is parallel, whether the corresponding pulley slots are aligned, and whether there is any skewing phenomenon.
- When one v-belt is badly worn and cannot be used, replace all the v-belts at the same time, with the same type and equal length, so that each belt has the same tension.
Maintenance:
- Regularly check the v-belt tension, after adjustment still can not meet the specified requirements, must be replaced with a new v-belt.
- In use, the operating temperature of the v-belt should not exceed 140°F, do not apply belt grease casually.
- Various types of v-belt, should not be coated with rosin or sticky substances, but also to prevent v-belt from oil, butter and gasoline, otherwise, it will corrode the v-belt, and shorten the service life.
- V-belt should be stored at a relatively low temperature, with no direct sunlight and no oil and corrosive fumes place.
Application
Lawn Care Equipment
| General Purpose
| Automotive Repair
|
ABOUT US
We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more.
SHIPPING
We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.
We offer free shipping to the lower 48 states and ship within 2 business days of payment, usually sooner. We do not accept P.O. Boxes. Please provide a physical address.
RETURNS
We offer a 30-Day Return Policy on items which you are not completely satisfied with. You have the option for a full-refund or an exchange of the item. No returns are available on items shipped outside of the USA.
PAYMENT
We accept PayPal.
CONTACT US
This page content is yet to come
Please ad us to your favorite seller and visit again later
Thank You
CUSTOMER SATISFACTION
We try our very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help.